Follow the individual steps to install the cover, motor cable and flexible suction hose securely and accurately. This will then ensure optimum functionality and a long service life for your drill.
1. Remove the cover from the main unit.
2. Pull the plug tube off the cover.
3. Pass the motor cable plug through the opening in the cover.
4. Screw the flexible suction hose to the cover.
5. Slide the motor cable plug into the guide on the cover from above. Do not push the plug in from the side.
The plug is sitting correctly if the locking tab clicks into place.
6. Set the plug-in tube onto the opening in the cover.
Pay attention to the orientation of the plug-in tube: The plug-in tube has a recess for the motor cable.
7. Slide the cover together with the hose attached to it into the main unit.
